WilleyQuick® Cold Glue and Adhesive Remover | Professional PDR Adhesive Remover

Overview

The WilleyQuick® Cold Glue and Adhesive Remover is made for professional PDR technicians who need a fast and dependable way to remove cold glue and adhesive residue from vehicle panels.

Cold glue can leave behind a stubborn film after a pull, and standard panel cleaners may not be enough to remove it without extra rubbing. This formula is designed specifically to help break down that residue so it can be wiped away with a microfiber towel instead of aggressively scrubbing the panel.

For technicians using cold glue throughout a hail repair, that can make a major difference. Faster cleanup means less time spent fighting residue between pulls and more time working the damage.

Packaged in a 16 oz bottle with an included spray head, WilleyQuick® Cold Glue and Adhesive Remover is ready for daily use in the shop, on hail sites, or in a mobile PDR setup.

Made Specifically for Cold Glue Cleanup

Cold glue works because it creates a strong grip on the panel. Once the pull is complete, however, some of that adhesive can remain behind.

Trying to remove the remaining film by rubbing harder isn't the answer.

The WilleyQuick® Cold Glue and Adhesive Remover is designed to soften and break down cold glue residue, allowing the technician to wipe it from the surface with considerably less effort.

This is especially useful during high-volume hail work where cold glue may be used repeatedly across the same vehicle.

Apply it, give it a short amount of time to work, and wipe the residue away with a clean microfiber towel.

Less Scrubbing on Painted Surfaces

Removing adhesive mechanically means creating friction against the paint.

The harder and longer you scrub, the more opportunity there is to leave behind unwanted marks or haze.

WilleyQuick® Cold Glue and Adhesive Remover helps reduce the amount of physical scrubbing needed by loosening the adhesive before you wipe the panel.

When used as directed, it provides a cleaner way to deal with cold glue residue while helping technicians maintain the finish of the surrounding painted surface.

Fast Cleanup Between Cold Glue Pulls

During a hail repair, small delays add up quickly.

If you're making repeated cold glue pulls across a roof, hood, deck lid, or side panel, you don't want to spend unnecessary time fighting adhesive residue after every pull.

This remover is designed to make that cleanup process faster.

Spray the affected area, allow the formula to work for a short period, and wipe the surface with a clean microfiber towel. For heavier buildup, a second application and light agitation can help remove the remaining adhesive.

That makes it useful both during the repair and for final cleanup once the cold glue work is finished.

More Than Just Cold Glue

Although the formula is particularly useful for cold glue cleanup, it can also be used to help remove other adhesive residue encountered during PDR and automotive work.

That gives technicians one product they can keep close by for adhesive cleanup instead of reaching for a general-purpose cleaner that may not be intended for the job.

Whether you're cleaning up after a cold glue pull or dealing with leftover adhesive on the panel, the goal is the same: break down the residue and remove it with less effort.

Built for Professional PDR Work

The WilleyQuick® Cold Glue and Adhesive Remover fits naturally into both mobile and shop PDR setups.

It's particularly useful for:

• Cold glue pulling
• Hail damage repair
• High-volume hail work
• Retail dent repair
• Adhesive residue removal
• Post-pull cleanup
• Steel panels
• Aluminum panels

The 16 oz bottle provides enough product for regular professional use while remaining easy to keep on a cart, in a detailing cabinet, or with your mobile glue pulling setup.

Directions for Use

Cold Glue and Adhesive Removal

1. Shake well before use.
2. Apply directly to the adhesive residue on a cool surface.
3. Allow the product to sit for up to one minute.
4. Do not allow the product to dry on the surface.
5. Wipe clean using a fresh microfiber towel.
6. Rinse the area if needed.

For Heavier Adhesive Buildup

If residue remains after the first application, apply the product again and use light agitation with a clean microfiber towel.

Avoid aggressive scrubbing. Give the product time to soften the adhesive and allow the towel to lift the remaining residue from the surface.

Why Buy WilleyQuick® Cold Glue and Adhesive Remover?

Cold glue has become a valuable part of modern PDR, but removing the residue is part of the process.

The WilleyQuick® Cold Glue and Adhesive Remover gives technicians a product made specifically to make that part of the job easier.

Instead of repeatedly scrubbing cold glue film from the panel, the formula helps soften the adhesive so it can be wiped away with less effort. That can mean faster cleanup between pulls, less unnecessary rubbing against the paint, and a cleaner panel when the repair is finished.

For technicians regularly using cold glue on hail and retail repairs, it's a simple product that belongs next to the rest of your glue pulling setup.

What's Included

• (1) 16 oz WilleyQuick® Cold Glue and Adhesive Remover
• (1) Spray Head

Key Features

• Formulated for cold glue residue removal
• Helps remove other adhesive residue
• Reduces the need for aggressive scrubbing
• Fast-acting formula
• Designed for professional PDR use
• Useful during and after cold glue pulling
• Suitable for steel and aluminum vehicle panels
• 16 oz bottle
• Spray head included
• WilleyQuick® professional PDR product

Perfect For

• Professional Paintless Dent Repair
• Cold glue cleanup
• Adhesive residue removal
• Hail damage repair
• Retail PDR
• High-volume hail work
• Mobile PDR technicians
• PDR shops