DESCRIPTION
xSergio Cold Glue Orange | High-Temperature PDR Cold Glue
Overview
Sergio Cold Glue Orange is a high-temperature cold glue formula designed for professional PDR technicians working in conditions where heat can make other cold glues difficult to use.
Developed by Sergio Pillon, the Orange formula is built to maintain a strong, reliable bond from 104°F to 140°F (40°C to 60°C). That makes it a specialized option for summer hail work, hot outdoor repairs, and other environments where panel and working temperatures climb well beyond normal conditions.
The formula is packaged in an easy-to-handle silicone container that keeps the product contained without the greasy mess associated with some cold glue storage methods.
When temperatures soar, Sergio Orange gives technicians a cold glue specifically formulated to keep pulling.
Built for Extreme Heat
Temperature has a major effect on cold glue.
As conditions get hotter, a formula that works well at moderate temperatures may become too soft or lose the grip technicians expect during a pull.
Sergio Orange is made specifically for hot-weather use.
Its recommended working range is:
104°F to 140°F (40°C to 60°C)
That specialized temperature range makes Orange particularly useful when you're working outside during summer hail season or dealing with panels exposed to significant heat.
Rather than trying to force a general-purpose cold glue to perform outside its preferred conditions, Orange gives you a formula designed around the heat.
Strong, Reliable Cold Glue Grip
Sergio Orange is designed to maintain a strong bond in high temperatures while supporting fast, repeatable cold glue pulls.
Only a small amount of material is needed on the cold glue tab. Using the right amount helps create strong contact while minimizing unnecessary squeeze-out around the edges of the tab.
For technicians working through a large number of dents, that balance helps keep the cold glue setup manageable and ready for the next pull.
Activate the Glue Before Pulling
Sergio Orange should be gently warmed before use.
You can activate the formula by massaging it by hand or carefully warming it with a hot-air gun.
Do not knead the glue.
The goal is to gently activate the material rather than aggressively working it.
Once activated, apply a small amount to your cold glue tab and establish contact with a properly cleaned panel.
Clean Panels and Tabs Matter
Cold glue performance depends heavily on the condition of the surfaces you're working with.
For the strongest adhesion, both the vehicle panel and cold glue tab should be clean and degreased before use.
Oil, dirt, old adhesive film, and other contamination can interfere with the bond between the cold glue, tab, and panel.
Starting with clean surfaces gives Sergio Orange the best opportunity to establish the strong grip it was designed to provide.
Made for Summer Hail Work
Orange earns its place in a cold glue setup when the temperature starts climbing.
During summer hail season, technicians may be working outside or on panels that have absorbed significant heat. Those conditions can change how cold glue behaves throughout the day.
With its 104°F to 140°F working range, Sergio Orange gives technicians a formula specifically intended for these hotter conditions.
Instead of fighting a formula that's becoming too soft, switch to a cold glue designed for the heat and keep the repair moving.
Easy Silicone Container
Sergio Orange comes packaged in a silicone container designed to keep storage and handling simple.
The grease-free setup helps keep the cold glue contained and ready to use without adding another messy step to your cold glue process.
For mobile and hail technicians carrying cold glue between jobs, the container also gives the formula a dedicated place to stay when it's not being used.
Residue Removal
If a film remains on the panel after pulling, rubbing alcohol can be used to help lift the remaining residue.
It's important to understand that rubbing alcohol does not dissolve the cold glue itself. It simply helps with removing remaining film from the working surface.
Keeping the panel and tabs clean between uses also helps maintain consistent adhesion as you continue working.
Cutting and Handling
When you need to separate a smaller amount of Sergio Orange from the main piece, use a knife lightly moistened with water.
The water helps prevent the material from sticking excessively to the blade while you're cutting it.
From there, use only the amount needed for the tab rather than overloading the working surface with cold glue.
Professional Use Case Scenarios
Summer Hail Repair
Orange is specifically suited to high-temperature hail conditions where a standard cold glue formula may become too soft.
Outdoor PDR
For technicians working outside in direct summer heat, the 104°F to 140°F range gives you a formula designed around those hotter working conditions.
Hot Vehicle Panels
Vehicle panels can become significantly hotter than the surrounding air. Sergio Orange provides a specialized option when the temperature of your working environment moves into its recommended range.
High-Volume Cold Glue Pulling
Strong grip and repeatable use make Orange a practical option for technicians making repeated cold glue pulls throughout a hot workday.
Why Buy Sergio Cold Glue Orange?
Sergio Orange isn't meant to be the cold glue you use in every temperature.
That's exactly why it's useful.
It's a specialized formula made for the conditions where heat becomes the problem.
When you're working between 104°F and 140°F, Sergio Orange is designed to maintain the strong, reliable bond needed for professional cold glue pulling.
You get a formula developed by Sergio Pillon, a wide high-temperature operating range, clean silicone storage, and strong tack designed specifically around hot-weather PDR.
When summer heat starts changing how your cold glue behaves, Orange gives you a formula made for the job.
How to Use
- Gently warm and activate the cold glue by massaging it by hand or using a hot-air gun. Do not knead.
- Make sure the cold glue tab and vehicle panel are clean and degreased.
- Apply a small amount of Orange to your cold glue tab.
- Make contact with the panel and perform your pull using your preferred cold glue setup.
- Use rubbing alcohol to help lift any remaining film if necessary.
- When cutting the glue, lightly moisten the knife with water to help prevent sticking.
Compatibility
Designed for use with professional cold glue tabs and cold glue slide hammers, including systems such as the Bull Kick and Smart Slide Hammer.
Key Features
- High-temperature professional PDR cold glue
- Developed by Sergio Pillon
- Designed for 104°F to 140°F (40°C to 60°C)
- Strong, reliable bond in hot conditions
- Made for summer and high-temperature PDR
- Ideal for fast, repeatable cold glue pulls
- Requires only a small amount on the tab
- Grease-free storage
- Silicone container
- Designed for professional cold glue tabs and slide hammers
Perfect For
- Summer hail season
- Hot-weather PDR
- Outdoor dent repair
- High-temperature panels
- Professional cold glue pulling
- Mobile PDR technicians
- High-volume hail repair
- Choosing a selection results in a full page refresh.