Precision Plate for KECO Robo® Mini Dent Lifters and K-1911 Dent Gun

The Precision Plate is one of those quiet upgrades in the paintless dent repair process that changes everything once you use it. Designed for techs who know exactly what they're doing and want clean, controlled results every time, this tool brings balance and accuracy into every pull.

If you're already using the KECO Robo® Mini Lifter or the K-1911 Dent Gun, this plate is built to fit right in. It's interchangeable with the stock feet and instantly upgrades your ability to handle tight, focused pulls with minimal distortion to the surrounding panel. Its biggest strength is in preventing over-pulls by applying counterpressure around the area you’re working. That means more consistent finishes, faster knockdowns, and cleaner outcomes with less need for correction.

Whether you're working hail, sharp bodyline dents, or detail pulls in soft aluminum, the Precision Plate gives you the control and efficiency that helps keep jobs moving and customers satisfied.

Built for Precision Dent Removal

The Precision Plate isn't just another foot replacement. It's a purpose-built tool that solves a specific problem: how to isolate force during a pull without disturbing surrounding metal.

Every tech knows that pulling on thin or stretched metal comes with risk. You’re often pulling not just the dent, but the area around it. This can lead to unwanted high spots, overcorrections, and extra knockdown work. The Precision Plate addresses that by surrounding your pull tab with a wide footprint that distributes pressure. It holds the undamaged panel in place while allowing a tight, controlled lift directly over the pull tab.

Wide Footprint, Narrow Focus

The wide, flat contact base gives you a reliable brace that stabilizes the area. The 22.4 mm opening is large enough to support most commonly used precision tabs up to 20 mm in diameter. This setup keeps you focused on the exact point of pull while managing how the surrounding metal responds. It’s a huge step up from narrow feet that can sink or shift during the lift.

In hail repair, this plate shines. On aluminum hoods or roof rails where metal is soft and pull energy needs to be contained, you’ll find that the plate keeps the work area tight. You get a cleaner dome and a faster transition to knockdown and polish. It’s ideal for any PDR tech doing high-volume hail work, bodyline corrections, or precision tab work with smaller tools.

Reduces Knockdown Time

Knockdown is often the step where time gets lost. Over-pulled metal slows down your workflow, introduces room for error, and makes clean finishes harder to achieve. With the Precision Plate, you’re minimizing the amount of metal you need to knock down in the first place.

By bracing the surface and limiting distortion, the tool gives you more accurate results on the first pull. That means you spend less time correcting mistakes and more time finishing dents the right way. The result is a faster, smoother process that’s easier on the metal and easier on your tools.

Compatible with Robo® and K-1911 Tools

This plate was designed to integrate with two of the most widely used tools in the KECO line: the Robo® Mini Lifter and the K-1911 Dent Gun. You don’t need to modify or adapt anything. It mounts directly in place of the standard feet using the same bolts.

Once installed, it stays firmly in place and feels like it was part of the original tool. It’s the kind of upgrade that once you add it, you’ll wonder why you worked without it.

Key Fit Details:

• Works with KECO Robo® Mini Lifter

• Compatible with K-1911 Mini Lifter (Dent Gun)

• No adapters or changes required

• Same mounting points as standard feet

Perfect for Hail, Sharp Dents, and Detail Work

When the job calls for precision, this tool delivers. Whether you're doing glue pulls on shallow hail or working out a tight aluminum crease, you need stability under pressure. The Precision Plate gives you the confidence to pull harder when needed and the restraint to avoid overcorrection.

It also comes in handy for:

• Roof rails and tight spots with limited access

• Detail pulls on aluminum or high-strength steel

• Removing fine sharp dents with minimal footprint

• Clean tab removal with reduced distortion

Durability and Construction

This plate isn’t made to look pretty. It’s made to last. KECO doesn’t mess around with fit and finish. The Precision Plate is cut from solid, wear-resistant material that can hold up to repeated pulling and daily field work.

It’s resistant to cracking, chipping, or bending. It doesn’t flex under pressure, and the wide surface area provides solid ground on even uneven panels. Whether you’re working in a shop or out in the field, it’s built to handle the demands of professional use.

Why It Matters for PDR Techs

In PDR, control is everything. This plate adds a level of control you can feel in your hands. You see it in your pull results, in the way your tabs release, and in how little time you spend on knockdowns. The wide base acts like an anchor, giving your tab the isolated pull it needs to lift the dent without affecting what’s around it.

Techs often talk about tools that save time, but this one does it in a quiet, consistent way. Over time, that adds up to faster panels, happier customers, and more efficient repairs.

Use It With:

• KECO Centipede Tabs

• Dead Center Tabs

• Gang Green Tabs

• PDR Glue Pull Tabs up to 20 mm diameter

• Any application where focused pull force is required

Installation and Setup

Installing the Precision Plate takes less than a minute. Just remove the original feet from your KECO Robo® Mini Lifter or K-1911 Dent Gun using a standard hex key or wrench. The Precision Plate uses the same screw pattern and bolts directly on with no modification.

Once installed, you're ready to go. There’s no learning curve and no extra adjustments. You’ll feel the difference right away on your first pull.

Key Features

22.4 mm Tab Opening

• Works with tabs up to 20 mm

• Supports a wide range of glue tab brands and shapes

• Keeps pulls centered and consistent

Broad Footprint

• Reduces panel distortion

• Helps prevent over-pulling

• Anchors the metal around the dent for focused lifts

Faster Knockdowns

• Less metal movement means fewer high spots

• Saves time during correction and finish

• Ideal for hail and fine detail work

Interchangeable

• Fits KECO Robo® Mini Lifter

• Compatible with K-1911 Dent Gun

• Easy swap for stock feet

Durable Construction

• Long-lasting under field use

• Handles regular daily repairs

• Built for professional results

How It Fits Into Your Workflow

Let’s say you're working hail on an aluminum hood with 50+ dents. You set up your Robo® Mini Lifter with this plate, line up the tab, and make the first pull. The dent lifts cleanly, and the surrounding metal stays flat. You knock it down and move to the next dent. That’s how this tool helps—by reducing time on each dent and giving you more control with less correction work.

You don’t have to babysit the metal or undo what the tool just did. It lets you move faster and cleaner through every panel.

Who It’s For

This tool is for working PDR professionals who need consistent results. If you're pushing dents for a living and demand clean, efficient panel work, this tool makes your job easier. It's not just for glue pullers—it’s for anyone who values quality and repeatability.

Great for:

• Hail techs working high-volume panels

• Shop owners looking to speed up efficiency

• Mobile techs doing detail work

• Aluminum and high-strength steel applications

• Techs who do light bodyline or brace-area pulls

Final Thoughts

The Precision Plate may look like a simple add-on, but its impact is real. It changes how force is transferred into the panel. It controls movement, reduces distortion, and limits over-pull—all of which speed up the process and improve outcomes. If you're already using KECO lifters and haven't upgraded your feet, this is the fastest way to improve your pulling setup.